Wilson Pro Demo Installation Kit for Installers| 620037

WilsonPro’s 620037 Pro Demo kit comes with everything you need to provide on-site demonstration of WilsonPro’s latest in-building Cell Signal amplification for prospective customers. It is a great sales tool for Wilson Pro signal booster installers and designed for easy setup and quick takedown. This Demo signal booster kit comes in a hard travel case on wheels. The hard case includes Network-Scanning-capable Enterprise 4300R signal booster (Enterprise 4300D version where “D” is for Demo) which has special “demo” firmware version 4300-D of the 4300R.

Our professional installers use this same demo kit to demonstrate to large local businesses who contact us regarding cell signal improvement solutions for their office, retail store, or building. The ROI would be many times its cost because it can be used over and over to generate sales and service revenues for lifetime. WilsonPro’s 620037 is a demo kit for installers. It provides an excellent demonstration of the new Network Scanning capability of WilsonPro 4300R cell phone signal booster kit. The bands will be automatically disabled after 2.5 weeks (400 hours) of use (this is why we’re referring to this demo amp as “Enterprise 4300D”).

The Pro Demo kit allows sales representatives to perform soft-install of the WilsonPro Enterprise 1300R amplifier system within 30 min or less. To help customers to better visualize the real-world impact of a WilsonPro system within their weak signal environment, the kit features an RF signal meter for taking “before and after readings during the on-site demonstration. The featured tripod allow for optimal mounting and positioning of the outside and inside antennas- all without the need to drill holes in the walls.

This kit includes WilsonPro 4300D amplifier, Tripod- mounted outside and inside antennas, Rechargeable RF Signal Meter with cable adapter, Wilson400 Coaxial cables 75 feet and 60 feet lengths, Pelican (TM) case with custom protective foam liner. WilsonPro’s 620037 Pro Demo signal booster kit works with all phones and devices on all carriers.

• After demo expiry, the display reads “Demo time expired. Amplifier bands have been disabled”. The demo counter can then only be reset by logging into the amp’s local amplifier configuration utility (LACU) via an ethernet connected computer & browser (details regarding the LACU connection are covered in the Enterprise install guide).
• The 4300D displays a “run-time” counter (similar to an odometer on a car). The counter is persistent, so power-cycling the unit, would not be a “work around”. The “run-time” counter prevents customers from ordering this inexpensive demo SKU (620037), and then using it to provide permanent cell coverage to a building.
• “4300D” is stickered with the word “DEMO”; However, the silkscreen in the unit will still read “Enterprise 4300R”.

 

• Pro 4300D (or other unit, as needed – contact us for difference in cost price).
• Tripod Impact LS-K4 (Folds down to 16″ with a max height of 48”).
• Tripod Filed FLXR003 (Folds down to 21″ with a max height of 84″).
• 25′ Extension Cord with 3 Way Outlet.
• Low Manfrotto 014-14 Rapid adapter (Quick clamps for both interior and exterior antennas).
• Roller-style hard carrying case, appropriately sized to contain and protect contents during shipping.
• 75′ Wilson 400 Coax Cable.
• 60′ Wilson 400 Coax Cable
• Wilson Yagi Directional Antenna (Wide-Band 50 ohm).
• Panel Antenna with Wall Mount (Wide-band 50 ohm).
• Foam inserts/other provisions to prevent movement and damage during transport.

 

 

Signal Booster Demo Kit Installation Diagram:

 

 

Demo Signal Booster Kit Contents:

 

 

How to install the WilsonPro Demo Kit:

• Mount outside antenna and inside antenna to their tripods and place in desired locations.
• Connect black antenna to the RF signal meter and turn it on. Then, measure signal strength near the outside antenna and the inside antenna across channel blocks and frequency bands.
• Uncoil cable and connect the 75 feet length to outside antenna and 60 feet length to inside antenna.
• Remove black antenna from the RF signal meter, then replace antenna with cable adapter.
• Connect the RF signal meter and adapter to end of the outside antenna’s 75 feet cable (before it comes into signal amplifier) to test the signal strength as it comes into the cellular amplifier.
• Remove cable from the adapter and RF signal meter and connect cable ends to appropriate amplifier antenna ports. Then, plug in the WilsonPro Enterprise 4300D amplifier and turn it on.
• Use the RF signal meter to take readings near the inside panel antenna where the pre-install readings were done. Encourage others to use their phones to further test the improved signal.

Need Help?

Contact us if you’re an end user for cell phone signal booster installation service that we provide using such commercial grade cellular signal booster kits.